Details
Overview
Protect Smiles with Confidence
ValueSeal Pit & Fissure Sealant is a premium fluoride-releasing, light-cured solution designed for long-lasting caries prevention in primary and permanent teeth. With its unique combination of advanced features, ValueSeal streamlines your workflow while providing optimal patient care. Its low viscosity ensures deep penetration into fissures, and the innovative color-changing formula enhances precision during placement.
Crafted for both efficiency and aesthetics, ValueSeal transitions to a standard opaque shade once cured, offering a professional finish that patients will appreciate.
Why Choose ValueSeal?
-
-
Fluoride Release: Provides ongoing caries prevention and strengthens enamel.
-
Radiopaque: Ensures clear visibility on X-rays for easy monitoring.
-
Effortless Application: Low-viscosity formula flows smoothly for deep fissure coverage.
-
Enhanced Visibility: Opaque color simplifies placement and ensures complete coverage.
-
Color-Changing Technology: Makes application precise and transitions to an aesthetic finish.
-
Durable Wear Resistance: Engineered with ultra-fine particles (<0.4 microns) for lasting protection.
-
Perfect for:
-
-
Sealing primary or permanent teeth to prevent decay.
-
Providing patients with an effective, minimally invasive preventive treatment.
-
What's in the Kit?
-
-
2 x 2 g Syringes: Preloaded for convenience and hygiene.
-
5 Precision Tips: For accurate and controlled application.
-
COMPOSITION
-
Methacrylate monomers (including Bis-GMA, TEGDMA)
-
Inorganic fillers
-
Fluoride salts
INDICATIONS
-
Pits and fissures of molars and premolars
-
Fissures on the lingual sides of anterior teeth
APPLICATION
Clean the enamel surface of the tooth thoroughly with a prophylaxis paste or pumice in order to remove any plaque
residue. Isolate the teeth to be sealed with a rubber dam or with cotton rolls and an aspirator tip. A dry working field is
needed for successful sealing. Conduct etching following the corresponding instructions of use. After etching has taken
Place the rinse surface thoroughly with water. Dry with oil-free, clean, dry air. The area will have a chalky white appearance.
If not, saliva contamination may have occurred, and etching should be repeated. Check that the area to be sealed is dry.
SYRINGE (Take appropriate measures to avoid cross-contamination between patients): Remove cap of ValueSeal Pit
& Fissure Sealant syringe and place a disposable syringe tip firmly onto syringe. Apply sealant directly to the fissure in
a thin layer without air bubbles. Allow 15 seconds for the resin to penetrate the fissure and pores in the enamel. Light
Maintain the light's tip as close to the surface as possible. In case oxygen inhibition layer is formed, wipe off
with cotton pellets and dry the cavity. Remove syringe tip and place cap on syringe immediately after use. The syringe
tip is for single use only. Be aware that polymerization may be started by ambient lighting or the dental operating light.
Light cure each layer with a halogen LED light (≥400 mW/cm2). Curing wavelength: 470±20 nm.
Curing Time
-
40 seconds (400-1000mW/cm²) / 20 seconds (>1000mW/cm²)
-
Examine the sealant both visually and with an explorer. The whole process will have to be repeated if part of the sealant
can be dislodged.
PRECAUTIONS
-
Use of protective gloves and a no-touch technique is recommended
-
Do not use any resin to adjust viscosity of composite material
-
Replace cap immediately after use
-
Neither store the composite material in proximity of eugenol containing products, nor let the composite come into
contact with materials containing eugenol. Eugenol can impair the hardening of the composite and causes
discoloration
-
Avoid contact with skin and eyes. In case of contact, rinse immediately with plenty of water and consult a physician
if necessary
-
Seek immediate medical attention in case of ingestion
-
Do not use after the use-by date
CONTRAINDICATIONS
Application of the above material is contraindicated.
-
If a dry working field cannot be established
-
If a patient is known to be hypersensitive or allergic to any of the ingredients
STORAGE
Store at 4-25°C (39-77°F). If temperature exceeds this, storing in refrigerator is recommended.
Caution: Do not freeze; do not expose to direct light or other heat sources. Return to room temperature before use.
Keep material out of children’s reach.
LOT NUMBER AND EXPIRY DATE
The above are printed on each package and should be quoted in all correspondence which requires identification of
the product.
DISPOSAL
-
Dispose of the product according to local regulations as applicable
-
USERS / FOR PROFESSIONAL USE ONLY
-
These materials have been developed for use exclusively by dental professionals and must be handled according to
the instructions of use. The recommendations included in the instructions correspond to the actual state of knowledge
regarding dental techniques. This does not relieve the user from determining the suitability of the product for its intended
purpose. The manufacturer cannot be held responsible for damages caused by other uses or incorrect handling.
REPORTING OBLIGATIONS
-
Should a serious incident in relation to this product occur, it should be reported to the manufacturer and the competent
authority.
Enhance Patient Outcomes with ValueSeal
Make caries prevention straightforward and effective. ValueSeal’s advanced design empowers you to provide reliable, high-quality dental care, ensuring happier patients and lasting results.
Shop ValueSeal Pit & Fissure Sealant at Linen Plus
Take advantage ofwholesale pricing and stock up on ValueSeal for your practice today! Competitive rates, fast shipping, and premium customer service make Linen Plus the preferred choice for dental professionals.
Order Now and Elevate Your Practice!