Details
- Space-saving pourover hot water dispenser plugs into any 120 volt outlet; no plumbing required
- 2gal (7.57L) of hot water in a space-saving machine just 7.1" (18.03cm) wide to fit any counter
- Includes drip tray
- High quality, easy-to-clean stainless steel exterior and tank for a long, dependable life
- Fresh, hot water is always available since the HW2 is plumbed to your water line
Electrical Configuration
- Volts-Factory Wired: 120V
- Watts-Factory Wired: 1800W
- Amps-Factory Wired: 15amps
- Phase-Factory Wired: 1
- Hertz-Factory Wired: 60Hz
| Water Access: | Plumbed |
|
Volts-Factory Wired: | 120V |
| water capacity range: | Low |
| Number Of Wires (+GND): | 2 |
| Cord Attached: | Yes |
| Plug type: | NEMA 5-15P |
| additional features: | Capacity at 60° F |
| 2D Format CD Available: | Yes |
| Minimum Input Pressure: | 20 PSI |
| Maximum Input Pressure: | 90 PSI |
| Inlet Water Fitting: | 1/4" Male Flare Fitting |
US SKU: 2500.0001
Servers and air pots sold seperately
1/4" Male Flare Fitting
1/4" Male Flare Fitting
1/4" Male Flare Fitting